3D printed Australia Railway Models
19/07/2017Top 5 Flexible Filaments for 3D printing
06/09/2017
Can you see the layer lines?
Only with a magnifying glass.
High definition printing with FDM 3D printers
At our top secret office in Australia, a small team of 3D printing technicians have come together to push the UP Box 3D printer to its limits, with some insanely detailed printed models.
Video
Printing with FDM printers
When it comes to Fused Deposition Modeling (FDM) 3D printers, due to the way the printer lays out the filament, limitations arise as to how precise and smooth the model can be.
However, the details in the models can be enhanced by adjusting the settings in which the model is printed at. This can be achieved by decreasing the layer resolution or layer height to a smaller micron e.g going from 250 microns to 200 microns. As an FDM 3D printer the typical range of resolutions achievable lies between 300 - 150 microns, however, the UP Box is no typical FDM printer, our team was able to achieve all the way down to 50 microns! For comparison, a single strand of hair is 50 microns in diameter.
But how is this possible?
How is this possible!!! How can your average consumer 3D Printer reach a resolution of 5/100 of a mm ?
Well the UP Box is no average 3D printer, previously this printer was able to achieve prints of up to 100 microns but now with the development of the finer 0.2mm nozzle, the UP Box is now capable of printing at 50 microns!
Throughout many hours of testing and using the new nozzles, we had found that due to how thin the filament was extruded, that not only would it be faster to travel from Auckland to Wellington and back then it would be to print something but preparation of the print was vital to getting a good print. The bed required a fair bit of leveling before we were able to achieve good adhesion. However, with this feedback, the manufacturer has engineered a specially designed platform that allows for fewer calibrations and more printing! At 50 microns!
Only with a magnifying glass.
High definition printing with FDM 3D printers
At our top secret office in Australia, a small team of 3D printing technicians have come together to push the UP Box 3D printer to its limits, with some insanely detailed printed models.
Video
Printing with FDM printers
When it comes to Fused Deposition Modeling (FDM) 3D printers, due to the way the printer lays out the filament, limitations arise as to how precise and smooth the model can be.
However, the details in the models can be enhanced by adjusting the settings in which the model is printed at. This can be achieved by decreasing the layer resolution or layer height to a smaller micron e.g going from 250 microns to 200 microns. As an FDM 3D printer the typical range of resolutions achievable lies between 300 - 150 microns, however, the UP Box is no typical FDM printer, our team was able to achieve all the way down to 50 microns! For comparison, a single strand of hair is 50 microns in diameter.
But how is this possible?
How is this possible!!! How can your average consumer 3D Printer reach a resolution of 5/100 of a mm ?
Well the UP Box is no average 3D printer, previously this printer was able to achieve prints of up to 100 microns but now with the development of the finer 0.2mm nozzle, the UP Box is now capable of printing at 50 microns!
Throughout many hours of testing and using the new nozzles, we had found that due to how thin the filament was extruded, that not only would it be faster to travel from Auckland to Wellington and back then it would be to print something but preparation of the print was vital to getting a good print. The bed required a fair bit of leveling before we were able to achieve good adhesion. However, with this feedback, the manufacturer has engineered a specially designed platform that allows for fewer calibrations and more printing! At 50 microns!
